Commercial Storage Tank - Large Volume Storage Tank- GMO

Titant Series Commercial Storage Tank 800 Liter to 2000 Liter

Designed for applications that require large quantities of potable hot water in short time

Titant Series Commercial Storage Tank is specially designed and made for many commercial applications, like electric energy, solar energy, heat pump energy, and gas energy, mult-energy hot water system.

The Family has 800 Liter, 1000 Liter, 1200 Liter, 1500 Liter, 2000 Liter ceramic lined tank capacity. The sacrificial anode helps protect the tank from the corrosive effects of water, and is accompanied by a 5 years tank warranty.

Product Features

Titanium Blue Water Heater Tank

GMO enamel coating is made from titanium blue enamel powder, and meet drinking water standard. Enamel Solubility reach Y class, and resist against 85℃ hot water.

Eternal Blue Heating Elements

Several elements for the fastest recovery and reliable operation

Enamel coating Incoloy800 elements last longer than common elements, is suitable for extreme and hard water conditions.

High Efficiency, Maximum Energy Saving

Eco-friendly non-CFC fom insulation, high density 40 Kilogram/m³, 95mm thickness, maximize energy saving during its operation. The hot water temperature drop less than 7 ℃ after 1 night.

Strong Anode Rod

GMO Stronge anode rod can perfectly protect the water heater tank against the corrosion, and ensure the even longer life of water heater.

How it Works

The commercial large volume storage water tanks always connect to at least one main energy sources, like solar energy, or heat pump, or gas. Cold water enters the storage water tank from the cold water inlet connection and pushes hot water out through the hot water outlet connection. Thanks to GMO water heater dip tube, it can maximize the hot water delivery. There are several units thermostats and heating elements in the middile of the storage water tank, it is electric backup. The enamel coating tank is able to prevent the water heater tank from corrosion and install an anode rod to help avoid corrosion. The temperature and pressure relief valve is a safety device designed to open if the water heater temperature or pressure of the tank exceeds certain limits. Water heaters capacity should be large enough to provide adequate hot water during the hot water consumption peak.

Top Quality Parts

Eternal Bule Heating Element

CB, UL Approved

59T66T Thermostat

UL, VDE Approved

P/T Relief Valve,

CSA, ASME, ANSI, FHA Approved

Brass Drain Valve

Lead-free brass, RoHS Approved

Certifications

Technical Parameter

GMO Commercial Storage Tank Parameter
Item	800L	1000L		1200L	1500L	2000L
Model	GD800080J-01 (Bi-convex)	GD10K080J-01 (Bi-convex)	GD10K080J-01 (Single convex)	GD12K080J-01 (Bi-convex)	GD15K080J-01 (Bi-convex)	GD20K080J-01 (Bi-convex)
Theoretical Capacity(L)	795	1000	1000	1200	1500	1995
Rated Pressure(MPa)	1.0
Inner Tank DIA(mm)	Φ762	Φ912			Φ1062	Φ1162
Tank Material &Thickness(mm)	BTC340R 4.0				BTC340R 5.0
Head Cap Material & Thickness(mm)	BTC340R 6.0
End Cover Material & Thickness(mm)	ABS/2.0
Inner Tank Height(mm)	1995	1786	1923	2101	1956	2166
Insulation Material & Thickness(mm)	Rigid Polyurethane/75				Rigid Polyurethane/95
Outer Shell Material & Thickness(mm)	PVC+Flexible Polyurethane/5.0
Outer Shell DIA(mm)	Φ930	Φ1080			Φ1270	Φ1370
Water Tank Height(mm)	2137	1953	2090	2268	2108	2318
Pallet Size(mm)	1050×1050×110	1200×1200×110			1350×1350×110	1450×1450×110
Package Height(mm)	2262	2063	2200	2378	2232	2443
Applicable Container	20’GP(2.38M)	20’GP(2.38M)	20’GP(2.38M)	40’HC(2.69M)	20’GP(2.38M)	40’HC(2.69M)
Approx. Net Weight(kg)	271	305	328	336	427	502
Approx. Gross Weight(kg)	289	327	350	358	453	536
Water Inlet/Outlet	G2″ inner thread/Two (Qty and position per demands)
Circulation	G2″ inner thread/Two (Qty and position per demands)
T/P Relief	NPT3/4″ inner thread/One (Qty and position per demands)
Sensor Well	Φ8 Blind hole PG7 Joint Three pcs (Qty and position per demands)
Water Return	G1″inner thread/Two (Qty and position per demands)
Heating Element & Thermostat	Screw Head Heating Element 4.0kW Two Pcs / 59T66T Two Pcs(Optional)
Heating Element Installation	DN200 Flange One Pc (Max. 6 Pcs per demands)
Top Air Outlet	G3/4″ inner thread/One
Drain Outlet	G1″ inner thread/One (Qty and position per demands)
Anode Rod/QTY	Φ28×1400/Two Pcs
Fittings/QTY	One NPT3/4″ T/P Valve, One G3/4″ Automatic Air Exhaust Valve (Optional)
Note: This is preliminary Design Plan. The diameter of inner tank is decided, but other details can be adjusted per requirements