With the largest range of compact heat pumps available in Australia, 150L, 200L, 270L, 340L. GMO has a solution for your home or commercial project.
Our extensive range of products can service single bedroom/bathroom residencens, right through to multi-level offices, hotels, motels, resorts, receational facilities, retail outlets. We can also tailor a solution for your specific commercial applications.
R290 is an almost perfect refrigerants: Negligible global warming potential (GWP), Zero ozone layer depletion potential (ODP), Degradation time is considered in months, Permanent green alternative in the long term, Less load for the same performance, Low energy consumption and higher efficiency.
Save on Power Bills
Can cut up to 80% of running costs compared to some electric storage units.
Suitable for use in harsh water quality conditions
The water does not make contact with any operational components, only the inner lining of the tank.
Solar without the panels
Hot water from solar energy, without the need for direct sunlight or roof panels. Heat pumps generate hot water day and night.
Easy Installation
A compact design resulting in reduced labour and installation costs.
GMO Solar Heat Pump Water Heater makes use of the heat in the ambient air around the system, and a reverse refrigeration process to heat the water. This means the sun doesn’t need to be shining, and whats more, it is so efficient that it can provide reliable hot water 24 hours a day, even in temperatures as low as -10℃ with no booster element. 1. Sun Heats the Air.Heat pumps rely on ambient air temperature rather than incidental sunshine. Utilising refrigeration principles, GMO Heat Pump can extract heat from the air without the need for direct sunlight, and can produce hot water in rain, hail or shine without the need for a booster element. 2. Energised air inducted into heat pump. Once the air is drawn into the heat pump, it passed over an evaporator containing a refrigerant which boils at a very low temparature. The boiling refrigerant is then compressed causing its temperature to be raised even futher transforming it into a super-heated vapour. 3. Energy transferrred to heat cold water. Using GMO tank wrap technology, this super-heated vapour is fed through copper coils(condenser) wrapped around the outside of the water tank, heating the water evenly and efficiently from the outside in. 4. Cold air expelled. Once the heat has been extracted from the air and transferred to the water, the remaining cold air is discharged from the heat pump by fan. Once the desired water temperature is reached, the system will go into energy-saving standby mode until it is required to commence heating again.
SCI compressor for R-290 refrigerant as R-290 are new alternative refrigerant with lower ODP and GWP than other conventional refrigerant.
High Quality Liquid Line Filter Drier
High Quality Expansion Valve 290
High Quality Sight Glass
100% Copper Material 55 Meters Heat Exchanger Wrap the 95% Cylinder Outside Surface Area, The Fastest Hot Water Recovery Rates
GMO Enamel Coating Heat Pump Water Tank
Titanium Blue Inner Tank
P/T Relief Valve,
WaterMark Approved
Name | 150L Solar Heat Pump | 200L Solar Heat Pump | 270L Solar Heat Pump | 340L Solar Heat Pump | Titan 340L Solar Heat Pump |
Model | 150-08AC6-290 | 200-08AC6-290 | 270-08AC6-290 | 340-08AC6-290 | 340-17ACW-134 |
Storage Size | 150L | 200L | 270L | 340L | 340L |
Rated Delivery | 130L | 175L | 250L | 315L | 315L |
Heating Output | 3.61kW | 3.61kW | 3.81kW | 3.81kW | 6.22kW |
Power Input | 0.84kW | 0.84kW | 0.84kW | 0.84kW | 1.66kW |
COP of Heating | 4.3 | 4.3 | 4.53 | 4.53 | 3.57 |
Compressor | Rotary | Rotary | Rotary | Rotary | 39cc Rotary |
Electrical Supply | 220-240V/50Hz/1Ph | 220-240V/50Hz/1Ph | 220-240V/50Hz/1Ph | 220-240V/50Hz/1Ph | 220-240V/50Hz/1Ph |
Circuit | 10 Amps | 10 Amps | 10 Amps | 10 Amps | 15 Amps |
Water Connections | 3/4 BSP | 3/4 BSP | 3/4 BSP | 3/4 BSP | 3/4 BSP |
PTR Valve Setting | 850kPa | 850kPa | 850kPa | 850kPa | 850kPa |
Operating Sound Level | 50 dBA | 50 dBA | 48 dBA | 48 dBA | 58 dBA |
Dimensions (Height x Diameter) | 1620mm×540mm | 1950mm×540mm | 1900mm×650mm | 2200mm×650mm | 2300mm×650mm |
Net (Empty) Weight | 115kg | 115kg | 135kg | 170kg | 180kg |
Ambient Operation Temperature | ﹣10℃ to +35℃ | ﹣10℃ to +35℃ | ﹣10℃ to +35℃ | ﹣10℃ to +35℃ | ﹣10℃ to +35℃ |
Water Temperature Setting | 60℃ | 60℃ | 60℃ | 60℃ | 60℃ |
Hot Water Production Rate | 72L/hr | 72L/hr | 75L/hr | 75L/hr | 134L/hr |
Equippment Process Advantage
Eco-friendly Clean
Sand Blasting
Flexible NC Rolling
Infrared Positioning Welding
100% Immersed Air Tightnes Test
360° Smart Enamel Lining
860℃ Gas Enamel Furnace
Pressurized Foaming
Quality Guarantee
All-round Quality Control System, ISO9001, ISO14001, OHSAS18001
Efficient and Strict Production Management
36 Key Quality Control Points
Recognized Test Compled with International Standards